Maintenance & Inspection Lights
Maintenance and Inspection lights are engineered specifically for areas exposed to flashes or explosions – caused by flammable gases or vapours. Lights used for such areas must operate at a temperature that will not ignite the surrounding flammable atmosphere.
LUX Levels
| Application | Horizontal Illuminance
Eave (LUX) |
Horizontal Illuminance
Emin/Eave |
Ra | Glare |
|---|---|---|---|---|
| Pit Floor | >100 | >0.5 | >40 | <45 |
| Wlding | >300 | >0.6 | >80 | <25 |
| Assembly | >500 | >0.6 | >80 | <22 |
| Painting | >750 | >0.7 | >80 | <22 |
| Painting (touch up) | >1000 | >0.7 | >80 | <19 |
| Inspection Pit | >500 | >0.4 | >70 | <25 |
| Maintenance Pit | >300 | >0.4 | >70 | <25 |
IMPORTANT NOTE: data is compiled from factory-specific lighting publications. However, these are recommendations only; careful consideration must go into every unique environment.
Related Products
